CNC Machinist

Position Summary:

Setup and operate vertical, horizontal 3-6 axis CNC machining centers and CNC lathes.

Shift Hours:

Monday – Thursday 7pm – 7 am

Primary Duties & Responsibilities:

- Setup of machines through use of proper tools, and the most efficient technique.

- Align vises, fixtures with indicator to be parallel or square to a reference surface.

- Indicate position of the fixture and parts. Set axis to correct position by
using the right numeric code. Load and unload the program. 
 

- Participate in the update and maintenance of set up sheets for all parts through the work center.
 

- Operate machine with proper guarding in place, report any damaged guarding, tool holders, tools etc. Ensure guards are replaced after set up. Monitor oil levels of machine; keep machine and tools in condition.
 

- Check the first part and make sure that all the dimensions are within tolerance.
 

- Change and modify programs where applicable.
 

- Change tool length and diameter offsets, fixture and pallet offsets.

- Modify and grind cutting tools as required, and use proper feed and speed for maximum efficiency.
 

- Keep production running; debur and prep parts for loading, or clean parts to reload.

- Check parts, debur, tapping, counter boring and cleaning up tools holders from the previous setup.
 

- Prepare tools and fixtures for the next job, get new tools, use regrind tools as required.

- Make sure to plan ahead when special tools may be required. 
 

- Follow Health and Safety Policies and practice safe work habits, industrial hygiene and good housekeeping around benches and machines.
 

- Identify opportunities for improvement via new tooling, set up reduction concepts and programming changes to improve cost and delivery
 

- Participate in root cause and corrective action identification for inferior quality parts.

- All other duties as assigned.
 

Required Skills/Competencies:

- Basic computer skills are an asset, Fanuc or Mazak control knowledge is a must

- Ability to use all the available measuring tools such as micrometer, dial gauges, deep micrometer, vernier, measuring block, and height gauges

- Ability to create layouts, read and interpret blue prints and drawings

- Full understanding of geometric tolerances

- Ability to change and set cutting tools
 

Working Conditions:

Physical

- Work is performed in a machine shop environment;
 

- Frequently required to stand; walk; use hands and arms;
 

- Use of equipment including 3-6 axis machines, hand tools, overhead cranes, etc

- Ability to wear personal protective equipment such as hard hat, safety shoes, safety
goggles, ear plugs, fitted dust mask, etc. as required
 

- Frequent lifting of heavy material up to 50 pounds is required.

Mental

- Must be able to run multiple machines at one time
 

- Must work under deadlines and related stresses in a timely manner
 

- Must be able to handle various personnel and other situations as they arise in a
professional manner (handle conflict and directions)

Required Experience:

- Minimum 3 years’ experience running CNC machines
 

- Aerospace experience preferred

Level of Education:

- A Certificate of Qualification as a General Machinist or equivalent and
additional upgrading courses involving CNC technology required